Setting up a Brick Paver Walkway or Eco Brick

The use of Bricks or Pavers to develop a walkway or patio area complements a house in a method that is unequaled. In addition, installing a Brick or Paver pathway does not always require a pro.

The secret to installing a Brick or Paver Walkway is to first appropriately prepare the area where the bricks/pavers are to be installed. In addition, string lines should be strung on each side of the walkway.
Once the area has been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline ought to equal the thickness of the brick or paver.

Now that you have a stable base, place a 1" pipeline or journal board the length of the pathway on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the prepared location. These strips will act as your sidewalk border and aid to keep the integrity and shape of the pathway. You can get these plastic strip borders at read more most home enhancement stores. The strips need to be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

You can then start to lay the bricks/pavers once this is done. There are many patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to guarantee that they interlock with each website other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the integrity of the sidewalk.

Undoubtedly bricks/pavers will require to be cut or divided when constructing the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the area where you desire to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, build up the outdoors edges with extra sand, and after that shovel in the topsoil and pack down firmly.
Spread stone dust over the new sidewalk and sweep into the cracks. This will complete the interlocking of the bricks and here help to remove any weed development.


In addition, setting up a Brick or Paver pathway does not necessarily require a pro. The key to setting up a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, put a 1" pipeline or journal board the length of the walkway on either side of the walkway. These strips will act as your pathway border and assistance to keep the stability and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or split when constructing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *